Dewatering, filtering and megalith technology

2024 Author: Seth Attwood | [email protected]. Last modified: 2024-01-02 02:33

Friends shared another modern technology that is gaining popularity due to its simplicity and efficiency in enrichment production, sludge filtration, water treatment, etc.

Dewatering technology, soil filtration through bags of a certain material. To immediately understand this technology, watch these videos:

But what is the connection between this technology and megaliths - you ask? Is it just an external resemblance. I proceed from the fact that if there were highly developed civilizations on Earth or they visited Earth, then all our new is the forgotten old. Either they give it to us (like metallurgy, writing), or we follow this path. I still propose to draw an analogy between the types of megaliths and this modern technology.

Mountain Shoria. Megaliths lie, as Vladislav Ratkun put it - "loaves"

Hanging stone. He relied on the subordinate, but he could have been obtained just using this technology. For more understanding, I will give my past articles: UNDERGROUND LEACHING OF METALS AND MEGALITES AS WASTE OF PASTE THICKNESS OF ROCKS and CHEMISTRY OF FORMATION OF ROCKS OF MEGALITES

It looks like alchemy, not chemistry, but it is worth taking a closer look … In them I expressed the version that supposedly megalithic natural formations are not the intrusion of masses, but dumps, waste from underground leaching of metals. And the thought in this article complements this picture - waste, sludge was stored in soft formwork, bags and filtered. Most likely, not all of the mass was pumped into the bags. But a number of examples speak for this.

Used for strength, so that the bags do not break and the fence, solid formwork. It turned out to be even blocks.

There were probably smaller bags of different sizes.

"Batons"

Piled it all up?

Here, the shape of the stones is very close to that which can be obtained from storage in bags.

She lived from fine syenite. This can be a filtration zone, a boundary where a different composition of the mixture accumulated and subsequently crystallized into such syenite with small crystals.

Plaster-like fine syenite. It is often found between blocks.

Whole album

Where are these bags, where are the traces of them - the reader will ask? For hundreds, if not thousands of years, organic matter has disintegrated. Only the seams remain. Where the bags were immediately removed or quickly dissolved under the action of alkali or acid (it is not known exactly what they were leached with), the blocks stuck together and a barely noticeable seam remained. The chemistry was drained, filtered. It is also embarrassing that there were no standards. Or did the mass then crack into smaller pieces during crystallization? Let's continue the analogy with modern dehydration technology:

Container bags are opened and waste, the dry residue is disposed of

Pay attention to the dry residue. It cracked when dry. Likewise, the megalithic mass could crack and get smaller blocks and intricate stones.

Also cracking when dry. I think that during crystallization there will be the same processes

A modern example. But why are not stored dumps, like megaliths near a flooded quarry?

You can find out more about this technology at the end of the article in Sources. *** Everyone knows the photographs of Peruvian megalithic polygonal masonry. There are still disputes: are they made mechanically or is it casting? In particular, examples where so-called "nipples" are visible on the blocks add fuel to the fire. For what they were needed - there is no single answer.

Here are some more examples:

The official version of these "nipples" is that they are believed to be the remnants of the lintel that held the stone in the rock when it was separated from the bulk of the stone mass. It is logical, it is not clear why these jumpers were not removed at the end of the work on creating the polygonal masonry. This is a version of machining and nipple formation. If we refer to the concrete version of the formation of Peruvian megalithic masonry, then there is a version that the nipples are a leaked solution through the formwork, following the removed vibrotip. As you know, according to modern technologies, to give concrete a higher density and release all air bubbles from it, they use

submersible vibrators:

But questions remain: why exactly at the bottom of each block? There are straight flat faces on the blocks, and why are the blocks themselves so swollen, and not with even edges?

I propose to apply the analogy of dehydration and filtration technology to this case. What if water or other liquid excess mass drained through these nipples? Were the bags themselves sealed? I published the version about rubber formwork here: SAKSAYUAMAN. RUBBER FORMWORK TECHNOLOGY?

Or that they were soft - there is no doubt.

In Egypt, they could also do the same, bet on the condition that we assume that granite was obtained like Siberian megaliths - from liquid rock by the method of thickening, filtration of the solution and its further crystallization.

I do not insist that I am right in this version. And I admit that these are just fantastic analogies. But I propose to think, suddenly there is information that allows you to continue the development of this thought …