Cryptoenergy in the past. Part 1

2024 Author: Seth Attwood | [email protected]. Last modified: 2023-12-16 15:55

Cryptoenergy, by analogy with cryptocurrency, is the same thing that everyone can create for themselves if they have certain knowledge and capabilities. And it can be developed to a very high level, and this thing does not depend on morally outdated superstructures in the form of a political regime, a central bank, an oil needle and other things, around which passions boil and some of the mighty of this world are overcome by a shiver.

Indeed, a lot of material on this topic has been brought up for public review, even more (and immeasurably) shoveled, but nothing more seems to be happening. As it was rightly noted, I am becoming like another couch witch doctor who crosses history, physics and esotericism, and recaptures the audience from the same writers of their own kind, of which there are about ten people. Well, he rushes away from himself written).. really, there is nothing to say. I will try to lay out a refutation, especially since a lot of work, not visible here, was also carried out. Thanks to all the respected critics who looked at this from the outside and suggested what it all looks like and how not to present yourself. Your comments, so to speak, have been taken into account in the best possible way. Yes, in fact, and the year ends, you can begin to sum up. But let's move on to the materiel.

Well, in fact, cryptoenergy, like cryptocurrency, is not a material thing, but it can do a lot in this world, much more than ammunition. Again, if you use this wisely, you don't need to get to the ammunition at all. The output will be conventional energy carriers, which are now causing hot and cold wars, and their availability will radically change the world value system. More like a fairy tale, but let's get closer to the facts. I will try to use the maximum available examples and definitions to convey to the readers what I want to say about all this. Well, since it won't work quickly here, you have to do it in several chapters. So let's go.

As we already know, a little over 100 years ago, almost the entire world used electrical installations that worked using the planet's renewable energy resource. Who was their discoverer, it is no longer possible to establish for certain, but their traces in the form of buildings or ruins of these buildings are found all over the world and on all continents. In addition, there are numerous archives of old photos that unambiguously confirm this fact. How could engineers of past centuries create such installations without having colliders, but even simple multimeters? The answer to this question is quite simple - their IQ was not at all higher than that of modern engineers, and they could solve such technical problems with the help of improvised materials and tools. Well, the knowledge too, which has been passed down through the generations. And this knowledge was at the level of development of the average master of some artel or the middle hand of a clergyman (it is far from the fact that the latter were anywhere else 250 years ago). Alas, now this knowledge is forgotten, distorted, mystified or in some other way, but it is not possible to find it in its original form in any sources. It remains only to reconstruct them by the deductive method from the available materials, which we will now try to do using simple examples. Well, along the way, let's remember what we were taught at school in physics, taking into account the fact that some things, due to some circumstances, could be taught differently.

So, we have a simple mechanical device that everyone, without exception, has seen and knows - a water mill.

This device is intended for the conventional transformation of the energy of the movement of water masses into mechanical energy of the wheel shaft. The device is as old as the world and does not need any other ideas. We only note that the movement of water in this case is created artificially or at least modified by a person to provide the necessary characteristics - the mass of water flowing per unit of time through the cross-section of the channel, and the speed of water movement.

Well, now let's very conditionally imagine that our water mill in the part of its wheel is nothing more than a closed conductor. The role of electrons in it is played by the blades, and the conductor itself repeats the shape of the wheel rim. The stiffness of the wheel rim determines the property of electrons not to approach each other under normal conditions and not to go beyond the conventional conductor. Well, as in any closed conductor of an electric circuit, in a certain local area of it, a driving force acts on electrons - the force of water in this case. The model turned out to be a bit allegorical, but you can imagine it. Electrons from that section of the chain (segment of the wheel), which fell under the action of the driving force (water), are pushed out of this area and acting along the chain on the electronic row (through the stiffness of the wheel holder), drive other electrons into the area of action of the driving force. I hope it is clear to everyone. Well, as we were taught in school, for the movement of electrons, a force of artificial origin is always needed (i.e. water in the case of this model), and without it, the movement of electrons is not possible. Modern science rejects other options as, in principle, not possible. Is this so? Let's continue with the same example.

Let's say that our mill is immersed in a certain atmosphere, which is a kind of popcorn made from small balls, the size of which is much smaller than the size of the mill itself. But at the same time, the atmosphere is under pressure, the magnitude of which is quite large. Let's call this atmosphere ether. At school, they taught on this topic that there can be no atmosphere in the form of ether, in principle, and scientists who lived up to the 20th century, representing this, were mistaken. But for now we will not perceive this, and imagine such a picture of a mill in the atmosphere, which in turn is under atmospheric pressure (everything is quite imaginable).

The atmosphere presses on the wheel of the mill from all sides, therefore it does not affect its rotation due to the movement of water in any way. And now let's slightly complicate our model with a certain special case.

Suppose that in a certain local area of our wheel, a certain force in a short period of time pushed the atmosphere sideways in different directions, for example, as in the figure, in the form of a paraboloid. In this case, the force pushing the atmosphere apart is directed perpendicular to the surface of the paraboloid, and a region of pressure difference forms at the top of it. What happens in this case? It is obvious that the very atmospheric column mentioned by Ostap Bender in his immortal literary work will collapse with great force and turn the wheel of the mill so that water from under it will fly in different directions. And the sharper the atmosphere moves sideways, the better this process will be. If we talk about the electrical circuit created on the basis of this model, then the electrons in it, under the action of the instant collapse of the low pressure region of the ether, will begin to move at a tremendous speed, not commensurate with the speed that a driving force artificially created by man can give them.

The low pressure region in question is called the cavitation region. It can be of any shape that the direction of the situationally acting lateral force gives it. The phenomenon of cavitation is quite simple, but oddly enough, in the school physics course it does not pass (in Soviet times, it was not passed exactly). For comparison, the Doppler effect is much more difficult to understand, but for some reason it was studied on an equal basis with everyone else. The fact that the effect of ether cavitation exists is quite easy to verify from a simple experiment, which I once wrote about earlier. To do this, any skeptic needs to buy an automatic washing machine with a plastic case, on which a film is glued to prevent damage and contamination, abruptly tear off this film and then hold onto the water tap. The effect is felt very well. The cavitation area in this case will be more like a knife blade, it will be concentrated in the place where the film is torn off from the plastic surface. Due to the unexplored properties of polymeric materials, when separating one from the other, ether is separated along with the materials, and the resulting cavitation region collapses from other directions. At the same time, the ether filling the cavitation area catches up (according to the same scheme) electrons from the surrounding space, and if the human body is on this path, then it will overtake it too. This effect is called static electricity and no one really delves into it. It seems to be useless if it is impossible to get any practical benefit from it. However, this is very frivolous. In all quasi-ancient installations that generate electricity, the effect of ether cavitation was used. But how?

If we turn again to our mill model, then the main problem of the formation of ether cavitation regions is the creation of local forces acting opposite to the direction of the ether pressure and reducing the ether density in the cavitation region due to the ether movement to neighboring points in space. How did the masters solve this technical problem in the recent past? Again, judging by the fact that they did not even have a semblance of devices that are now, they did it with the usual improvised means. The solution to such a problem must be sought somewhere on the surface. But where?

And here let's imagine that in our conventional ethereal atmosphere some longitudinal waves are walking, similar to sound waves in an ordinary atmosphere. These waves never die out. If we imagine our planet as a spherical resonator, then conventionally in the ethereal atmosphere, longitudinal waves with frequencies of several Hz have a more or less significant amplitude. These waves have been studied by all for a long time, they are called Schumann waves, although long before Schumann the parameters of these waves were familiar to masters. Theoretically, these waves can be adapted to create areas of ether cavitation, since they already create a pressure difference by themselves, but there is only one BUT - at each unique geographic point the superposition of the fundamental harmonics of the waves changes strictly individually over time, and it is not mathematically possible to calculate this pattern (there are too many variables in the equation). How to be in this case? The answer suggests itself - you don't need to calculate anything, but you just need to carry out some measurements of the experimental characteristics of Schumann waves at the desired point in space. A kind of engineering survey, only with an electrical bias. But let's say that these studies were carried out, and what next? And then the task is to create, based on the characteristics of this point, an ordinary … volumetric resonator. Probably, everyone has already guessed what kind of resonator churches we are talking about, but we will return to this later.

And yet again, back to our mill model. Especially for those who have caught its imperfection, I will develop one more thought.

If you look closely, the blades of the wheel, both in the case of water and in the case of the atmosphere, are set in motion according to the same principle - pressure on the blades. Only in the case of water does it move due to the movement of water, which, by and large, is artificially created by man. And this process goes on continuously and monotonously, as long as the water resource in the canal is alive. And in the field of cavitation, the process is realized due to the auto-replenishing natural pressure of the atmosphere, and exclusively due to the self-destruction of the cavitation area, and for its continuation it is necessary to create a new similar area, of course, after the completion of all transient processes. Actually, since we are talking about static electricity, then it must be dynamic. Well, in fact, the fundamental difference between statics and dynamics lies in the above-described case - for dynamics you need the movement of something, in the case of our model - water. But, as mentioned above, in both cases, the nature of the movement of the blades in the wheel is the same - all the same, something presses on them, either water or air. Then maybe, in analogy with an electric circuit, these two elements are one and the same, just set in motion in different ways? Let's take a closer look.

How is mechanical energy converted to electrical energy? Consider the simplest example, which is probably familiar to everyone from the school physics course.

From the school course, we know that if a permanent magnet is introduced into a closed loop (on the right), then an electric current will appear in it, which, in turn, will create a magnetic field that prevents a change in the field of a permanent magnet (remember). In an open loop (on the left), this will not happen for obvious reasons. If the bar between the turns is rigidly fixed on the rack, then the energy of the received electric current will be converted into the internal energy of the coil material. If the bar has a degree of freedom in the horizontal plane, then when the magnet moves deep into the closed loop, the latter will begin to move after the magnet. As you can see, in any case, there is still some kind of spacer in the form of a changing magnetic field between the mechanical energy (the movement of the magnet) and the electrical energy (the current in the loop). What is it, if we go back to our model? But before we move on, a little more remark. Whoever did this experiment in physics lessons with his own hands (I did) will not let it lie that a closed ring moves behind a magnet at an average magnet speed of 1-2 mm / s. If you move it faster, then the ring will stay in place, although according to all laws, at any speed of the magnet that a human hand is able to make, it must move. And even if you take the thickest magnet in cross-section, the effect will be the same. So what's the catch? Now let's move on to the model.

Let us again agree that our Soviet school stand is in a certain ethereal atmosphere with pressure, which in a normal state is conditionally homogeneous. But at the same time in it, as mentioned above, there are some longitudinal waves with a frequency of units of Hz, which consist of several harmonics of body waves. At each point in space, these waves fly by quasi-chaotic, their momentary superposition in terms of the magnitude and direction of the resulting vector has some kind of complex pattern. And now let's imagine a permanent magnet, but a little differently from what was taught at school. From the legacy of the 19th century, we got a lot of drawings with a strange geometric plot, for example, such as:

Those who wish can find a great many of them in the vastness of the great network. This does not require much work, it is enough to look at the wallpaper patterns of those times. And what is it all about, if you look closely? And now let's imagine that this is nothing more than an increased internal structure of a substance or compounds of different substances, which were once cataloged by knowledgeable people (alchemists), and those who came after them, as unnecessary, adapted for patterns for wallpaper. As you can see, it looks more like a labyrinth, and this labyrinth is unique for each substance or compound. Let's say there is a maze like this:

At the same time, the ether particles have dimensions that allow them to penetrate into these labyrinths, under the action of the same longitudinal waves in the surrounding space. If you look closely at this structure, then, with certain conventions, the ether will relatively easily enter it under the action of waves directed from the left, and with some difficulty under the action of waves from the right. It turns out a kind of polarization, as a result of which the etheric waves of the surrounding space can relatively easily pass through a substance with a similar structure in one direction and at the exit of this structure a concentrated etheric field will appear, which will be accelerated by longitudinal waves in all directions, but most of this ether will go to that place, from where the ether entered the substance, due to the resulting pressure difference. As everyone has already understood, we are talking about iron and a permanent magnet model. As you can see, there is no magic here, the field of the magnet is created exclusively due to longitudinal waves in the ether and the properties of iron. And what we call an incomprehensible magnetic field is an ordinary aetheric field, which was obtained by the usual transformation of Schumann waves. Let's go further, or rather return to the experience.

By introducing the same polarized piece of iron into a closed loop, we simultaneously bring in a polarized ether stream there. Under the action of antiphase Schumann waves, this flow begins to bend around the loop, and an ordinary etheric funnel is formed (like a funnel itself in any other medium under the action of two oppositely directed forces in one plane on the substance). This funnel generates an ordinary electric current in the loop, in full accordance with the gimbal's rule. The process is similar to the water funnel formed when the water is drained from the bathroom. At school we were taught that the magnetic field of a conductor consists of concentric circles, but it turns out that this is not entirely true. The swirling ethereal masses inside the conductor begin to push electrons in a completely analogous way to the example considered on the example of a mill wheel and water. It should be noted that after the formation of the etheric funnel, any change in the direction of the ether on the outer border of this funnel will cause an avalanche-like collision of the etheric masses, which in turn will cause an avalanche-like displacement of the funnel to the side, and with it the conductor. This happens exactly when the magnet is moving. So the doctrine that a certain magnetic flux generates an EMF of self-induction, which in turn generates an electric current in a loop, which in turn generates a field that prevents the change of the magnet's field - slightly full) (nya. The field remains a field, but not magnetic but ethereal, and slightly changes the internal structure. And that's all. But imagine that the magnet enters the loop very quickly. But the loop stays in place. What happens? Absolutely nothing, just the speed of Schumann waves, bending the polarized ether coming out of the magnet, must be commensurate with the speed of the magnet itself. This means that the speed of Schumann's waves is commensurate with the speed of a hand with a magnet. Otherwise, the etheric funnel of the necessary characteristics will not turn out, and the loop will stand still. As you can see, Faraday's law in the school curriculum is strongly approximated, and something is missing in this formula.

This is the model. By the way, in foreign languages the words "atmosphere" and "ether" sound the same as our words "light" and "holy". Obviously there was once a word that was common to everyone and meant one thing.

So, as we can see, everything was not so difficult before, and to create electrical installations it was not necessary to invent colliders and others like them. Most likely, in the 20th century, this knowledge was distorted to the laws of conservation of energy, and later they simply began to invent something completely unnecessary in this area (my opinion).

And in the old days everything was simple. It was enough to measure the required characteristics of the space, and on the basis of them it was possible to apply typical units of electrical installations. And there is a mass of evidence that this happened. And more than incomprehensible measuring devices in museums have survived.

One of these meters, sitting on the roof of a building, is depicted in an engraving. If you look closely, there is a hoop with light bulbs on the statue, and some kind of metal connection goes inside the statue. For what? One could consider it a fantasy of the artist, if I had not met a similar thing in Venice.

This is not a rib supporting the statue at all, and some functional element is not clear for what. And yet, what is the person on the roof measuring there? Probably, this is the very electrical surveys mentioned above. But let's talk about them in the next part of the story, entitled "Entertaining ecology".

Until next time, to be continued.